Welcome to SP!  -
Areas & RangesMountains & RocksRoutesImagesArticlesTrip ReportsGearOtherPeoplePlans & PartnersWhat's NewForum

Welding your snowshoes?

Post climbing gear-related questions, offer advice. For classifieds, please use that forum.
 

Welding your snowshoes?

Postby kevin trieu » Fri Apr 08, 2011 8:19 pm

after six years of hard use, the binding on my snowshoes finally gave out. basically the metal teeth of the snowshoe where the ring of the binding was attached to broke. has anyone attempted to weld it back? would welding work on aluminum? i was at the mechanic getting my muffler welded back to the truck and thought about asking him about the snowshoes but didn't want to look ridiculous.
User Avatar
kevin trieu

 
Posts: 979
Joined: Mon Mar 21, 2005 5:59 pm
Location: Laguna Hills, California, United States
Thanked: 88 times in 64 posts

Re: Welding your snowshoes?

Postby HeyItsBen » Fri Apr 08, 2011 8:40 pm

Hey Kevin, welding aluminum is possible but tends to take more skill/experience than steel. I'm having a hard time picturing the exact piece you're talking about, but if its a thin piece, it could get pretty ugly, tough to weld.

Is this broken piece not replaceable?

I know some of the metal pieces on my snowshoes (MSR Denali) would require replacing a few rivets, but that would probably be easier than welding.
User Avatar
HeyItsBen

 
Posts: 361
Joined: Sat Jan 24, 2004 3:22 am
Location: San Diego, California, United States
Thanked: 9 times in 9 posts

Re: Welding your snowshoes?

Postby jspeigl » Fri Apr 08, 2011 11:15 pm

Chances are it is under warranty. If you attempt to weld it, it will probably void the warranty. MSR warranty policy:

http://cascadedesigns.com/Service/Warranty-and-Repair
User Avatar
jspeigl

 
Posts: 182
Joined: Thu Dec 04, 2008 6:13 am
Location: Rancho Cucamonga, California, United States
Thanked: 5 times in 5 posts

Re: Welding your snowshoes?

Postby drpw » Sat Apr 09, 2011 1:45 am

If its MSR then talk to them first, they might replace it for free, had all good experiences with them. After you do that, use this as the opportunity to get off the slowshoes and onto some sort of skins (AT, splitboard, approach). You'll never look back--except at your friends on slowshoes as you break trail way ahead of them--after getting on skins, and that's the just the up track, taking 1 hour to go down what takes 5 in snowshoes is epic.
User Avatar
drpw

 
Posts: 243
Joined: Tue Nov 17, 2009 9:47 pm
Location: Santa Ana, California
Thanked: 21 times in 17 posts

Re: Welding your snowshoes?

Postby rhyang » Mon Apr 11, 2011 3:38 am

I recently broke a binding on a pair of 8 year old MSR denali ascent's: the metal actually fatigued and broke. I called up MSR expecting to pay $20 for a new binding, but they sent me a pair for free. A couple years ago I broke a few rivets on some MSR lightning ascent bindings. Again, they sent me a replacement pair gratis. Well, almost free .. I had to package up the old bindings and send those back to MSR in Seattle.

No welding is needed to replace the bindings, just a pair of pliers and a screwdriver to change out the clevis pins. Love MSR's customer service :)
Taaaake !
User Avatar
rhyang

 
Posts: 8960
Joined: Wed Apr 28, 2004 8:55 pm
Location: San Jose, California, United States
Thanked: 59 times in 38 posts

Re: Welding your snowshoes?

Postby kevin trieu » Mon Apr 11, 2011 8:58 pm

i have the MSR Denali classic. per your picture, the vertical piece broke at the ring. so i guess it is steel.
User Avatar
kevin trieu

 
Posts: 979
Joined: Mon Mar 21, 2005 5:59 pm
Location: Laguna Hills, California, United States
Thanked: 88 times in 64 posts


Return to Gear

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 0 guests

© 2006-2013 SummitPost.org. All Rights Reserved.