Using Internal Guy Lines

Tips, tricks, workouts, injury advice.
User Avatar
IagosGhost

 
Posts: 1185
Joined: Mon Jan 08, 2007 4:45 pm
Thanked: 141 times in 89 posts

Using Internal Guy Lines

by IagosGhost » Thu Aug 04, 2016 5:24 pm

I've read about adding internal guy lines to the tent set up to make the tent stronger in bad weather. I can't find much information on how to do this. Can anyone help me out with some links to instructions on how to internally guy out a tent? I appreciate the help.
R.I.P. 2LT Michael E. McGahan 1985-2010
"It's time to be immortal 'cause heroes never die!"

User Avatar
ExcitableBoy

 
Posts: 3666
Joined: Wed Nov 09, 2005 9:33 am
Thanked: 663 times in 496 posts

Re: Using Internal Guy Lines

by ExcitableBoy » Thu Aug 04, 2016 6:16 pm

Try Stephon's Warmlite Tent web site.

The following user would like to thank ExcitableBoy for this post
IagosGhost

User Avatar
nartreb

 
Posts: 2232
Joined: Sat Apr 03, 2004 10:45 pm
Thanked: 184 times in 155 posts

Re: Using Internal Guy Lines

by nartreb » Thu Aug 04, 2016 6:25 pm

Structurally, that's a great idea. It would make the tent significantly less comfortable, though, and I'm not sure how I'd do it in most tents I've used, which lack strong interior anchor points.

To visualize how the idea works, start by imagining a cube-shaped tent. Here's a cross section diagram:

Code: Select all
A.....B
.      .
.      .
C.....D

Points C and D are anchored to the ground. To hold the tent up, there are rigid poles from C to A, D to B, and A to B.

Now imagine a strong wind from left to right. What happens is this:
Code: Select all
      A.....B
  .        .
.        .
C.....D

Carry this to an extreme and the tent folds over: the distance from A to D becomes zero, and (here's the key) the distance from C to B gets much longer.

So to prevent this, you can tie a non-stretchy cable from C to B. Note how it cuts right across the middle of your interior space - that's the drawback. Also, you need a strong interior anchor point at C and at B. Not all tents will have those.

No matter the actual shape of the tent, the basic folding-over dynamic is the same. Your interior stay should bisect the angle between the ground and the tent wall.

The following user would like to thank nartreb for this post
IagosGhost

User Avatar
nartreb

 
Posts: 2232
Joined: Sat Apr 03, 2004 10:45 pm
Thanked: 184 times in 155 posts

Re: Using Internal Guy Lines

by nartreb » Thu Aug 04, 2016 6:32 pm

ExcitableBoy wrote:Try Stephon's Warmlite Tent web site.


Better yet, their Flickr pages:

https://www.flickr.com/photos/warmlite/4370801694

User Avatar
ExcitableBoy

 
Posts: 3666
Joined: Wed Nov 09, 2005 9:33 am
Thanked: 663 times in 496 posts

Re: Using Internal Guy Lines

by ExcitableBoy » Fri Aug 05, 2016 3:54 pm

I had a Mountain Hardwear single wall tent, one made briefly before they came out with the EV2 model. We were descending the south side of Mt. Hunter in a mighty storm and were forced to pitch it on an exposed ridge, barely dug in. Most of the velcro tabs that hold the poles in place ripped away in short order, so I used some cord to tie everything back together, using an internal guying type of system that allowed the tent to last out the storm.


Return to Technique and Training

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 0 guests